
Scratch and dent appliances can save you hundreds — sometimes over $1,000 — on the exact same models sold at big-box stores. The flaws are cosmetic, usually from shipping or warehouse handling. Here's how to inspect one like a pro.
1. Locate every mark
Walk around the appliance and ask where the damage is. Most dents are on the sides or back — areas that are hidden once the appliance is installed between cabinets.
2. Check doors, seals and hinges
- Open and close each door — it should swing smoothly and close firmly.
- Run your hand along the gasket (rubber seal). It should be soft, intact and free of tears.
- Look at the hinges for bends or misalignment.
3. Test the controls and display
Ask to see the unit powered on. Buttons should respond, the display should be clear and there should be no error codes.
4. Look inside
Check shelves, drawers and racks. Make sure everything is included and slides properly.
5. Confirm the warranty
6. Ask about the serial plate
Make sure the appliance has its original OEM serial plate. All of our units are 100% genuine — never refurbished with generic parts.
Ready to shop?
See today's scratch & dent deals or request a live video tour to inspect units from home.
